Monday, February 24, 2020

Buying a Human Hair Wig

Buying a Human Hair Wig


Human hair wigs are not for everyone. They can be difficult to deal with and if you want to be able to wear a wig that is already styled with no hassle, a synthetic wig may be better for you. Human hair wigs tend to wash straight and then you have to try and get them back to the style they were purchased. This is not always easy. However, there are also lots of benefits for human hair wigs. You can use heated appliances on them. You can re-style them and dye them if necessary. They can be washed in hot water and normal hair products can be used on them. You do not have this option with synthetic wigs.

To get the best from your human hair wig, once washed, use good quality conditioner and leave in for a while, up to an hour if you can but 10 minutes is fine! You have to put goodness into the hair to keep it in good, manageable condition. Once you have washed the conditioner out of the wig, leave it dry about 80% before you blow dry it. By doing this, it will make it much easier to style the wig. You can stretch the hair drying it from very wet. Drying the wig is not easy as it will not stay on your head! Try holding it to dry it or use a wig stand. Once dry the wig can be straightened or curled to finish off the style. At this stage you can style it perfectly well when it is on your head. Remember that over use of heat on your wig will reduce its lifespan. Take as much care of it as you can.

When you first get your wig, it may be a good idea to get it cut by a hairdresser. This helps it to look more like "you". The human hair used for wigs is generally Asian hair which is much thicker than European hair so most people DO tend to have the wigs cut to thin them out or layer them into a more manageable thickness. If you have a good hairdresser who is able to cut your wig, it may wise to get it washed and re-styled by them every few weeks if you have difficulty re-styling it yourself.

Generally, Human hair wigs last longer than synthetic wigs, but it is down to you and how you treat it as to how long it will last! Some people make them last 12 - 18 months, others only 6 months - some even less! Synthetic wigs last around 3 months if they are worn on a daily basis.

Expect to pay between 350 - 700 UK pounds or more for a good quality human hair wig. You can buy them cheaper but they will not be as good. This is fine if you do not need it for every day wear but it is worth investing in a good wig if you are an essential wig wearer.

You can have wigs tailor made to fit your head. These are extremely expensive and not necessary unless you really struggle to get a wig that fits. Most wigs come with adjustable tabs at the back which will allow you to make the wig slightly larger or smaller.

There is a much bigger selection of synthetic wigs available than human hair wigs as a much higher percentage of people buy synthetic wigs. This is mainly due to cost. If you are new to wigs and feel unsure of what to buy, call at a shop and try several wigs on before making your choice.

wigs for black women human hair

Wednesday, February 19, 2020

Are You Using a Safe CBD Oil

Are You Using a Safe CBD Oil

CBD oil is becoming one of the hottest new products on the market today. In fact, annual sales of CBD oil products in 2018 was nearly 600 million and is estimated to be growing at a rate exceeding 107 percent annually. Prior to 2017, CBD products were available only in head shops, natural food stores, and at a few doctor's offices. Since that time, the market has exploded and CBD products are now available in natural food stores, national food stores, beauty salons, nail salons, convenience stores, and even gas stations. But, are these CBD products manufactured from safe CBD oil?

First of all, let's examine what we mean by safe CBD oil. Some reports indicate that as much as 40% of the CBD products on the market tested positive for heavy metals like lead and arsenic, concentrated chemical pesticides, bacteria, fungi, toxic mold, THC, and numerous other dangerous impurities. Most people would agree that products containing these impurities would be considered to be unsafe.

Most of these unsafe CBD oil products are grown and manufactured in China, Mexico, and numerous third world countries that do little or no oversight in the products they sell.

One of the most common and dangerous impurities commonly found in tainted CBD products is chemical pesticides. These chemicals are used to kill insects and other organisms that can be harmful to the plant. According to the Toxics Action Center, "Pesticides have been linked to a wide range of human health hazards, ranging from short-term impacts such as headaches and nausea to more serious health problems like cancer, reproductive damage, and endocrine disruption." It could be very dangerous to ingest any type of tainted CBD product if it is contaminated with pesticides.

The best and safest products available on the market are those in which the hemp is grown in the United States and the oil is produced in a food-grade facility. And, of course, it must be tested by a reliable, third-party facility. If you're looking for a safe CBD oil product with consistent high-quality and levels of CBD, look for suppliers located in the U.S. who use only U.S. grown hemp. In addition, look for suppliers that whose products are thoroughly tested for purity, quality, and cleanliness. And, as an added measure of safety and quality, many of these manufacturers are regulated by state agencies.

As an example of this type of state oversight, CBD manufacturers located in Colorado must register with the Colorado Department of Public Health and Environment (CDPHE). Then,they must meet several requirement such as demonstrating that industrial hemp produced in that facility does not contain more than three-tenths of 1 percent of THC, the psychoactive compound in marijuana that causes one to get high.

CBD oil california

Thursday, February 13, 2020

What Are The Disciplines Required For Soccer Betting?

What Are The Disciplines Required For Soccer Betting?


Soccer betting, like all forms of sports betting and betting in general requires discipline, self-control and knowledge. Like anything else, there are soccer tips you can learn to give you an edge about the game and soccer betting tips you can use to make sure you bet intelligently. Without the proper soccer betting tips, you can find yourself making bets without much reward or that are likely to lose you your money.

Soccer tips to help you learn the game and make smart bets

o Learn the lineups of teams: By learning the lineups of various teams you will learn who the best players are, what position they play and how they match up with opponents.

o Follow the injury news and reports: One of the best soccer tips you can give to somebody is to follow injury reports. Just one major injury on a soccer team can swing the balance on who is more likely to win a game. Additionally, if you follow the lineups as well, you will know if the team has a good backup or not.

o Use past history as a guide: The more times that two teams play each other, the more likely a consistent history is to develop. When betting on soccer, consider the history of the teams before making your pick. Does the home team always win? Is there never a long three or four game consecutive winning streak by one team? Among these soccer tips, this is particularly valuable information that you can use to guide your decision process.

o See who has momentum: Sometimes the record of teams can be misleading. A team with 2 losses might have lost both games right before the upcoming game, and be on a losing streak. While a team with 4 losses could have lost those games in the beginning of the season and be on a winning streak, playing great soccer. Look inside the records for more information before placing your soccer bets.

Soccer betting tips you can use

o Don't bet on teams or leagues you don't know: Your knowledge is a resource and an important tool. One of the best soccer betting tips you can find is to never bet on things you do not know well.

o Never bet more money than you have: This is the foremost rule in making soccer bets, never be lured in to borrow and bet more money than you can afford to lose.

o Don't bet emotionally: If you lose a bet, you may be inclined to bet on something you wouldn't have otherwise to try to make up for it. Or, you may bet on your favorite team when there is not a good chance that they will win. As a rule, follow the soccer betting tip of betting with your brain, not with your heart.



สมัครสมาชิก UFABET

Tuesday, February 11, 2020

Top Tips for Selling Your Car

Top Tips for Selling Your Car

The days of placing a piece of cardboard with a for sale sign on your car are long gone. Nowadays, if you're serious about selling your car, you have to be a bit more professional in going about it, as well as being aware of the various scams that try to dispossess you of your vehicle. Talking about scams is the subject for another article. In the meantime, here are the top 5 tips to sell your car:

1. Have a clean and presentable car - Nobody wants to buy a beat-up car, unless the intention is to salvage it for parts. Remember that you only get one chance to make a good impression, and that first impression will be how your car looks. Going to a detailer is best, but if you have the patience to do a few hours of cleaning yourself, you will save some money. Just make sure to clean the car as thoroughly as you can, including the trunk and engine bay. Remember to vacuum the carpet thoroughly and spend time removing the grit from little nooks and crannies like the aircon vents. Wax your car as a final step to restore some of the paint's gloss. If you happen to read other articles with selling advice, you will find that cleaning your car is one of the top 5 tips to sell your car.

2. Make sure your car is in sound mechanical condition - address any clunks, rattles and strange noises emanating from the engine, drivetrain or suspension. These may be just minor things that a bushing change or an adjustment will eliminate. Unexplainable noises will turn off a buyer pretty quickly, or be a chance for the buyer to ask for an unreasonable drop in price. Change the engine oil 1 week before you put your car up for sale, top up coolant and washer fluid reservoirs as well as the brake/clutch fluid containers. This will give the impression that you have maintained the car well and that no major trouble is lurking around the corner for the new owner.

3. Take advantage of free online ads and other forms of exposure - now that your car is spic and span, take plenty of clear pictures. Use a decent camera, not the one on your phone. Buyers will think that if you can't take the time to take proper pictures, then you most probably didn't care for your car in the same way. Your pictures don't need to be professional-quality shots. Buyers only want to see the condition of the car, so take pictures of the interior, seats, trunk, engine bay, door panels and of the entire car from several angles. Take pictures of dents and major scratches, if any, and post these on your ad too. The buyer will then know the condition of the car before the actual viewing.

While print ads, word of mouth and for sale signs on the car still work, you will get the most exposure from an online ad. There are a lot of sites where you can sell your car for free or for a minimal amount. The number of viewers who can see the vehicle you are selling number in the thousands. Always be accurate and truthful in your description of the vehicle. A significant omission always turns off the buyer and you will have wasted each other's time.

4. Have proof of ownership, service records, registration and other pertinent records on hand - if you don't have ownership documents in order, don't bother selling your car just yet. It will also help a lot if you have a few months left in the motor vehicle's registration. Show as complete a maintenance record as you can and if you don't have service records or receipts, even a maintenance journal will help.

5. A reasonable selling price - many factors come into play in pricing the vehicle. Remember that many car owners usually price their cars higher than it is actually worth. The biggest price determinant will be the mileage of the vehicle compared to the same make and model from the same year. A good starting point would be to check the high and low prices for the same year and model of car you are selling. Starting at the middle of the range, add or subtract to the selling price of your car depending on the features, defects and overall condition of the vehicle you are selling.

In conjunction with a clean car, a reasonable price is also one of the top 5 tips to sell your car. Just bear in mind that seasonality (don't sell a convertible in winter), seasonality, type of vehicle (family sedans are always steady sellers) and state of the economy are also factors that affect the price of a vehicle.



Unfallwagen Ankauf

Saturday, February 8, 2020

What's In The Future For Electronics Recycling?

What's In The Future For Electronics Recycling?



Electronics recycling in the U.S. is growing as the industry consolidates and matures. The future of electronics recycling - at least in the U.S., and perhaps globally - will be driven by electronics technology, precious metals, and industry structure, in particular. Although there are other things that can influence the industry - such as consumer electronics collections, legislation and regulations and export issues - I believe that these 3 factors will have a more profound impact on the future of electronics recycling.

The most recent data on the industry - from a survey conducted by the International Data Corporation (IDC) and sponsored by the Institute of Scrap Recycling Industries (ISRI) - found that the industry (in 2010) handled approximately 3.5 million tons of electronics with revenues of $5 billion and directly employed 30,000 people - and that it has been growing at about 20% annually for the past decade. But will this growth continue?

Electronics Technology
Personal computer equipment has dominated volumes handled by the electronics recycling industry. The IDC study reported that over 60% by weight of industry input volumes was "computer equipment" (including PCs and monitors). But recent reports by IDC and Gartner show that shipments of desktop and laptop computers have declined by more than 10% and that the shipments of smartphones and tablets now each exceed that of PCs. About 1 billion smart phones will be shipped in 2013 - and for the first time exceed the volumes of conventional cell phones. And shipments of ultra-light laptops and laptop-tablet hybrids are increasing rapidly. So, we are entering the "Post-PC Era".

In addition, CRT TVs and monitors have been a significant portion of the input volumes (by weight) in the recycling stream - up to 75% of the "consumer electronics" stream. And the demise of the CRT means that fewer CRT TVs and monitors will be entering the recycling stream - replaced by smaller/lighter flat screens.

So, what do these technology trends mean to the electronics recycling industry? Do these advances in technology, which lead to size reduction, result in a "smaller materials footprint" and less total volume (by weight)? Since mobile devices (e.g., smart phones, tablets) already represent larger volumes than PCs - and probably turn over faster - they will probably dominate the future volumes entering the recycling stream. And they are not only much smaller, but typically cost less than PCs. And, traditional laptops are being replaced by ultra-books as well as tablets - which means that the laptop equivalent is a lot smaller and weighs less.

So, even with continually increasing quantities of electronics, the weight volume entering the recycling stream may begin decreasing. Typical desktop computer processors weigh 15-20 lbs. Traditional laptop computers weigh 5-7 lbs. But the new "ultra-books" weigh 3-4 lbs. So, if "computers" (including monitors) have comprised about 60% of the total industry input volume by weight and TVs have comprised a large portion of the volume of "consumer electronics" (about 15% of the industry input volume) - then up to 75% of the input volume may be subject to the weight reduction of new technologies - perhaps as much as a 50% reduction. And, similar technology change and size reduction is occurring in other markets - e.g., telecommunications, industrial, medical, etc.

However, the inherent value of these devices may be higher than PCs and CRTs (for resale as well as scrap - per unit weight). So, industry weight volumes may decrease, but revenues could continue to increase (with resale, materials recovery value and services). And, since mobile devices are expected to turn over more rapidly than PCs (which have typically turned over in 3-5 years), these changes in the electronics recycling stream may happen within 5 years or less.

Another factor for the industry to consider, as recently reported by E-Scrap News - "The overall portability trend in computing devices, including traditional form-factors, is characterized by integrated batteries, components and non-repairable parts. With repair and refurbishment increasingly difficult for these types of devices, e-scrap processors will face significant challenges in determining the best way to manage these devices responsibly, as they gradually compose an increasing share of the end-of-life management stream." So, does that mean that the resale potential for these smaller devices may be less?

The electronics recycling industry has traditionally focused on PCs and consumer electronics, but what about infrastructure equipment? - such as servers/data centers/cloud computing, telecom systems, cable network systems, satellite/navigation systems, defense/military systems. These sectors generally use larger, higher value equipment and have significant (and growing?) volumes. They are not generally visible or thought of when considering the electronics recycling industry, but may be an increasingly important and larger share of the volumes that it handles. And some, if not much, of this infrastructure is due to change in technology - which will result in a large volume turnover of equipment. GreenBiz.com reports that "... as the industry overhauls and replaces... servers, storage and networking gear to accommodate massive consolidation and virtualization projects and prepare for the age of cloud computing... the build-out of cloud computing, the inventory of physical IT assets will shift from the consumer to the data center... While the number of consumer devices is increasing, they are also getting smaller in size. Meanwhile, data centers are being upgraded and expanded, potentially creating a large amount of future e-waste."

But, outside the U.S. - and in developing countries in particular - the input volume weight to the electronics recycling stream will increase significantly - as the usage of electronic devices spreads to a broader market and an infrastructure for recycling is developed. In addition, developing countries will continue to be attractive markets for the resale of used electronics.

Precious Metals
In the IDC study, over 75% by weight of industry output volumes was found to be "commodity grade scrap". And more than half of that was "metals". Precious metals represent a small portion of the volume - the average concentration of precious metals in electronics scrap is measured in grams per ton. But their recovery value is a significant portion of the total value of commodity grade scrap from electronics.

Precious metals prices have increased significantly in recent years. The market prices for gold, silver, palladium and platinum have each more than doubled over the past five years. However, gold and silver have historically been very volatile since their prices are driven primarily by investors. Their prices seem to have peaked - and are now significantly below their high points last year. Whereas, platinum and palladium prices have traditionally been driven by demand (e.g., manufacturing - like electronics and automotive applications) and generally more stable.

Telecommunications equipment and cell phones generally have the highest precious metals content - up to 10 times the average of scrap electronics based on per unit weight. As technology advances, the precious metals content of electronics equipment generally decreases - due to cost reduction learning. However, the smaller, newer devices (e.g., smart phones, tablets) have higher precious metals content per unit weight than conventional electronics equipment - such as PCs. So, if the weight volume of electronics equipment handled by the electronics industry decreases, and the market prices for precious metals decreases - or at least does not increase - will the recovery value of precious metals from electronics scrap decrease? Probably the recovery value of precious metals from electronics scrap per unit weight will increase since more electronics products are getting smaller/lighter, but have a higher concentration of precious metals (e.g., cell phones) than traditional e-scrap in total. So, this aspect of the industry may actually become more cost efficient. But the total industry revenue from commodity scrap - and especially precious metals - may not continue to increase.

Industry Structure
The electronics recycling industry in the U.S. can be thought of as comprising 4 tiers of companies. From the very largest - that process well in excess of 20 up to more than 200 million lbs. per year - to medium, small and the very smallest companies - that process less than 1 million lbs. per year. The top 2 tiers (which represent about 35% of the companies) process approximately 75% of the industry volume. The number of companies in "Tier 1" has already decreased due to consolidation - and continued industry consolidation will probably drive it more towards the familiar 80/20 model. Although there are over 1000 companies operating in the electronics recycling industry in the U.S., I estimate that the "Top 50" companies process almost half of the total industry volume.

What will happen to the smaller companies? The mid-size companies will either merge, acquire, get acquired or partner to compete with the larger companies. The small and smallest companies will either find a niche or disappear. So, the total number of companies in the electronics recycling industry will probably decrease. And more of the volumes will be handled by the largest companies. As with any maturing industry, the most cost efficient and profitable companies will survive and grow.

Outlook
What are the implications of these trends?
• The total weight of input volumes will probably not continue to grow (as it has at 20% annually) - and may actually decrease in the U.S.
• The electronics recycling industry will continue to consolidate - and the largest companies will handle most of the industry volumes.
• The inherent value for resale and materials recovery will probably increase per unit volume.
• Reuse and services may become a more significant part of the total industry revenue than recycling and materials recovery.

Conclusion:
In an environment of consolidation and potentially decreasing volumes, developing additional capacity or starting a new facility for electronics recycling in the U.S. could be very risky. Acquiring the most cost efficient existing capacity available would be more prudent.

E-Schrott Recycling